Wanco 2-Bearing Belt Drive Generator - AB50, 4 kW Continuous, 120/240 Volt, Single-Phase
List Price:
$1,085.00
Sale Price
$943.00
SKU: AB50
Model: AB50
Status: Available
Documentation
| Brochure/Specification |
Fuel
Belt-Drive
Grade
Professional
Style
Two-Bearing Generator
Starting
NA
Watts (Rated)
4,000
Watts (Surge)
5,000
Engine
N/A
Compliance
All 50 States
Product
| Manufacturer | Wanco |
|---|---|
| SKU | AB50 |
| Model Number | AB50 |
| Generator Grade | Professional |
| Generator Style | Two-Bearing Generator |
| Special Features | Single-Phase |
Engine Details
| Engine/Motor Brand | N/A |
|---|---|
| Fuel Type | Belt-Drive |
| Starting System | NA |
| Min.Engine Horsepower | 8 |
| Minimum Required Torque (ft. lbf.) | 12.5 |
| Generator RPM | 3600 RPM |
Documents
Generator Details
| Surge Start Watts | 5,000.0 |
|---|---|
| Continuous Rated Watts | 4,000.0 |
| Phase | Single-Phase |
| Voltage | 120, 240 |
| Rated Amps @ Min Volt (Commonly 120v) | 33.3 |
| Rated Amps @ Max Volt (Commonly 240v 1-Phase) | 16.7 |
| Required RPM | 3600 |
| Shaft Diameter (Inch) | 0.9 |
| Shaft Diameter (mm) | 22.2 |
| Shaft Keyway Slot Width (Inch) | 0.2 |
| Shaft Keyway Slot Width (mm) | 4.8 |
| Connection | 4-Wire |
| Frequency | 60 Hz |
| Power Factor | 1.0 |
| Alternator | Brushless W/Capacitor |
| Copper Windings | Yes |
| Total Harmonic Distortion | Less Than 6% |
| Circuit Breakers | Yes |
| Bonded Neutral (Y/N) | Bonded Neutral To Ground |
| Control Panel Display | Voltmeter |
| Rotation | Bidirectional |
| Operational Position | Horizontal |
| Bearings | Two-Bearing |
Outlets
NEMA 5-20R Duplex (20 Amp 120)
 NEMA L14-20R (20 Amp 120/240)
 |
Accessories
| Pulley & Belt | Not Included |
|---|
Warranty
| Consumer Warranty | 2 Yrs. (Limited) |
|---|
Other Information
| Weight (Lbs.) | 42 |
|---|---|
| Ship Weight (Lbs.) | 47 |
| Dimension No Wheel Kit | 14.5"L x 7.25"W x 7.5"H |
| Agency Compliance | CARB (California), EPA |
| California Destination-Operators-Buyers Warning | Click Here For California Proposition 65 Warning |
| Stk. Itm. | No |
Wanco 2-Bearing Belt Drive Generator - AB50, 4kW Continuous, 120/240 Volt, Single-Phase
The Wanco 2-Bearing Belt Drive Generator AB Series is a two-bearing generator designed for a variety of horizontal operations. Attach your own motor, double pulleys and belts for 3600 RPM operation.
- Built-in receptactles with circuit breakers
- Brushless Design with capacitors
- Automatic Voltage Regulator (AVR)
- All copper windings
- Shipments < 150 lbs. Will Be By FedEx Or UPS To Garage Or Front Door
- Shipments > 150 lbs. Will Be By Extes-Express, RL Carriers, Or Other To Curbside At Truck Deck Height
- Standard Freight To Lower 48 States
- Standard Freight Does Not Include Service To Alaska, Hawaii, Or Destinations Outside The United States. Contact Us To Make Other Accommodations For Shipments Outside The Lower 48 States.
We found other products you might like!
-
Wanco 2-Bearing Belt Drive Generator - AR120, 11 kW Continuous, 120/240 Volt, Single-PhaseList Price: $2,425.00 Sale Price $2,108.00 -
Wanco 2-Bearing Belt Drive Generator - AB60, 5 kW Continuous, 120/240 Volt, Single-PhaseList Price: $1,134.00 Sale Price $986.00 -
Wanco 2-Bearing Belt Drive Generator - AR100, 9.5 kW Continuous, 120/240 Volt, Single-PhaseList Price: $1,981.00 Sale Price $1,722.00
